You are here: Home » News » Industry News
  • 2021-01-06

    Hot straight seam steel pipe manufacturers, the small caliber in the output of crude oil or heating pipes, in order to reduce the heat pipes to the soil, outside the pipe plus insulation composite layer. Commonly used insulation material is a rigid polyurethane foam, a temperature of -185 ~ 120 ℃. T
  • 2021-01-05

    Any open at both ends and having a hollow cross section, and a relatively large cross-section of steel whose length and perimeter, can be called steel pipe. When comparing hour length and cross section perimeter, may be referred to the pipe section or tubular parts, they all belong to the category o
  • 2021-01-04

    Speaking of spiral steel pipe fracture and crack problem, we have to refer to the relatively backward country in the above application and production of spiral steel pipe, so for spiral steel pipe fracture is relatively small. However, due to our existing buried pipeline, most are spiral steel pipe,
  • 2020-12-30

    Seamless steel pipe for casingStandard: API SPEC 5CT(American Petroleum Institute)Grade: J55,N80,L80,P110Dimension tolerance:TypesOut diameterWall thicknessCold drawn tubeOut diameterOut diameter<114.3±0.79-12.5%≥114.3-0.5%,+1%MeMchanical properties:StandardGradeTensile strengthYield strengthAPI SPE
  • 2020-12-29

    Also known as the "skin effect," When an alternating current through a conductor, due to induction effect caused by the larger cross section of the conductor current distribution is uneven, the closer the conductor surface current density. The skin effect increases the effective resistance of the co
  • 2020-12-28

    In the lsaw steel pipe production process, because the primary process is in a hot state, so the heating operation is resolution product quality is very important process. The heat with the furnace, according to their results, and reheating furnace is divided into two kinds; the former is used to bi
  • 2020-12-23

    Welded tube bending refers to long rolling (type, rod, pipe) in the longitudinal extent of the bending direction. Per meter length of the curved chord is called curvature per meter; total length of the curved with the total chord ratio is called the total length of the total curvature. Bending of al
  • 2020-12-22

    (1) spiral boiler tube manufacturing process to determine their residual stress is large, according to foreign information records, and some even close to the yield limit, LSAW pipe boiler tube expansion process due to the use of residual stress close to zero. (2) spiral seam welding boiler pipe-lin
  • 2020-12-21

    In recent years, China's pipeline construction ushered in a new development of the peak. At the same time, the world market for steel pipe demand increases rapidly, so a large number of steel pipe exports. Behind the production and application of this prosperity, there has been some steel pipe quali
  • 2020-12-16

    What is casing pipe or tube?The metal pipe or tube used in drilling well or any underground installation is called casing tube or pipe. Casing pipes are used for casing oil & gas wells. In casing a large diameter pipe is assembled and is inserted into a drilled section of a bore-hole. Why is casing
  • Total 71 pages  Go to Page
  • Go

HOT PRODUCT

QUICK LINKS

CONTACT US

  Hunan Gaoxing Steel Development Zone, No.1888 Purui South Rd, Wangcheng District,Changsha, Hunan, China

Tel: 0086-0731-88678598

  inquiry@threewaysteel.com

Copyright  2020 Threeway Steel Co.,Ltd. All Rights Reserved
PRODUCT INQUIRY