A 45-degree pipe elbow fitting is a type of pipe fitting that changes the direction of a piping system by 45 degrees. This type of elbow is less abrupt than a 90-degree elbow, which can reduce pressure loss and turbulence in the flow. 45-degree elbows are commonly used in situations where space is l

1. The uses of large-diameter stainless steel pipes can be divided into oil well pipes (casing, oil pipes drill pipes, etc.), pipeline pipes, boiler pipes, mechanical structure pipes, hydraulic support pipes, gas cylinder pipes, geological pipes, chemical pipes (high-pressure fertilizer pipes, petro

Plastic-coated steel pipe not only has the advantages of high strength, easy connection, and water flow impact resistance of steel pipe, but also overcomes the disadvantages of easy corrosion, pollution, and scaling of steel pipe in water, low strength, and poor fire protection performance of plasti

Exhibition time: 2024-09-25 ~ 09-27Opening hours: 09:00:00-18:00:00Holding place: Asia-Kazakhstan Kazakhstan Atakent International Exhibition Center - 42 Timiryazev str., Almaty, 050057 Almaty, KazakhstanExhibition industry: Oil and gasKazakhstan Oil and Gas Exhibition (KIOGE) is a famous oil and ga

The pressure ratio of spiral steel pipe on gas pipelines also tends to decrease gradually. The pipe diameter, pressure, and pressure ratio need to be optimized and compared. When the output is determined, the pipe diameter, pressure, and pressure ratio are determined by optimization. If higher press

Welding of galvanized steel pipes should pay attention to:1. Galvanized steel pipes with a diameter greater than 100mm should be connected with flanges or special ferrule-type pipe fittings.2. To ensure the quality of welding, the galvanizing of the weld should be treated at the welding joint of the

1. What is GB A312 stainless steel pipe?GB A312 stainless steel pipe refers to stainless steel pipes that meet the national standard GB/T 14976-2012 "Stainless Steel Seamless Pipe". Stainless steel pipe is a kind of pipe with corrosion resistance, which is widely used in chemical, petroleum, medicin

First, causes of curling of stainless steel pipes1. Production equipment problems: In the production of stainless steel pipes, if the equipment is unstable or improperly adjusted, curling is likely to occur. For example, unbalanced roller installation, roller damage, loose drive chain, etc. may caus

First, the importance of application temperatureWhen selecting steel pipe materials, it is crucial to understand their application temperature range. Different materials have different heat resistance, and using them beyond their design temperature range will cause deformation, breakage, or other sa

1. **Service Conditions:**- **Pressure:** The material must be able to withstand the maximum operating pressure of the system.- **Temperature:** Consider both the operating temperature and any extreme temperatures that may occur during operation.- **Fluid Compatibility:** The material must be compat