3PE anti-corrosion steel pipe base materials include seamless steel pipes, spiral steel pipes, and straight seam steel pipes. The three-layer polyethylene (3PE) anti-corrosion coating has been widely used in the oil pipeline industry due to its good corrosion resistance, water vapor permeability res

Welded steel pipes offer a variety of advantages that make them suitable for a wide range of applications in industries such as construction, oil and gas, water supply, and more. Here are some key advantages:1. Strength and Durability: Welded steel pipes are known for their high strength and durabil

1. Measuring Tape or Ruler:One of the simplest methods to measure the length of a spiral welded steel pipe is to use a measuring tape or a ruler. This involves physically wrapping the tape or ruler around the circumference of the pipe at the desired location and then extending it to the full length

1. Measure the Outside Dimensions:Use a measuring tape or a ruler to measure the outside width and height of the square tube. Place the measuring device at one end of the tube and extend it to the opposite end. Ensure that the measuring device is aligned perpendicular to the sides of the square tube

1. Secured Pallets or Racks: Store square and rectangular tubes on pallets or racks that are strong enough to support the weight of the tubes. Ensure that the tubes are securely placed to prevent them from sliding orppling over.2. Separation: Avoid stacking tubes directly on top of each other to pre

1. Scratches or Scuffs:Defect: Scratches or scuffs on the inner or outer surface of the pipe can occur during the perforation process.Prevention: Use proper lubrication and cooling during the piercing process. Ensure that the equipment and tools used are in good condition and free from any sharp edg

In construction projects, plastic-coated spiral steel pipes are an important pipe material and are widely used in various projects. Plastic-coated spiral steel pipe has the advantages of corrosion resistance, pressure resistance, wear resistance, etc. It has a wide range of applications and provides

Steel reducers are a type of reducing pipe fittings used at the reduced diameter of pipelines. Steel reducers are produced and manufactured by compression pressing, diameter expansion pressing, or reduction and expansion pressing. The steel reducer is The reducing forming process is to put the tube

The difference between seamless steel pipes and other long strips is that there are no seams around them, and the steel pipe section is hollow. Due to different cross-sectional shapes, they are often classified into round steel pipes and heterogeneous steel pipes. In terms of actual use efficiency,

Advances in materials processing have brought unique opportunities to the field of stainless steel pipe production. Typical applications include exhaust pipes, fuel lines, injectors, and other components. When producing stainless steel pipes, a flat steel strip is first formed and then shaped into a