The specification of the connection method of galvanized steel pipe depends on the type of connection method. Generally, there are several types, such as flange connection, clamp groove connection, and welding. In the actual connection of galvanized steel pipes, welding is the most commonly used con

The cast steel flange has an accurate blank shape and size, a small processing amount, and low cost, but has casting defects (pores, cracks, inclusions); the internal structure of the casting is poorly streamlined (if it is a cutting part, the streamlined form is even worse);Forged steel flanges gen

The steel concentric reducer is its connection form, which is directly butt-welded with the reducer and the steel pipe, and the steel is hot-pressed or forged. Classification: pushing, pressing, forging, casting. Corresponding to the steel concentric reducer, there are also eccentric reducers, and t

1. IPN8710 anti-corrosion steel pipe: When there are many kinds of corrosive media in the steel pipe, such as acid, alkali, salt, oxidant, and water vapor, the coating must be chemically inert, resistant to acid, alkali, and salt corrosion, and the coating film should have a dense structure and wate

Process the sides of the two plates into the required form at one time, steel plate edge milling machine: machine the two sides of the plate used for pipe making, and make the parallelism of the two plates within the specified tolerance range, to manufacture high-precision Steel pipes are prepared.

The continuous rolling process of straight seam steel pipe: the continuous rolling process of straight seam steel pipe, continuous rolling process is used in the continuous rolling and fixed diameter reduction process of steel pipe. Continuous steel pipe rolling is a process in which steel pipes and

The forging process generally consists of the following processes, that is, selecting high-quality billets for blanking, heating, forming, and cooling after forging. Forging methods include free forging, die forging, and membrane forging. During production, different forging methods are selected acc

1. For pipelines with high requirements for peak regulation, due to the uneven gas consumption of users and frequent fluctuations in pipeline pressure, the alternating stress on the steel pipe is very large, and the existing defects in the pipe will expand under the alternating stress. If you choose

Usually, we use epoxy coal tar pitch paint, if the requirements are high, you can use 3 oils and 2 cloths. 3 layers of paint and 2 layers of the glass fiber cloth, staggered construction. If required, the primer and topcoat of epoxy coal tar pitch are generally used directly, and each is applied twi

Straight seam steel pipes are welded by a welding method parallel to the longitudinal direction of the steel pipes and are widely used. With the same diameter and length, the welding length of the straight seam steel pipe is much less, while the welding length of the spiral steel pipe may increase b